How to use rainproof tarpaulin

      When heavy rain is coming, we need to cover the cargo with tarpaulin to prevent rain erosion. But many people are rushing around, the tarpaulin is crumpled and cannot achieve the expected results. This is caused by not knowing the rules of tarpaulin use. How can we quickly and neatly cover the goods with tarpaulin? Qingdao Tarpaulin Factory tells you.

      The tarp should be spread first, and then the four corners of the tarp should be fixed first. If possible, the floor can be cushioned under the goods to achieve the waterproof effect.

     The fixing of the ground nails should have an inclination angle, the angle of view should be 35-45 degrees, the interval and direction of the ground nails into the ground should be on the same axis as the rope, and the rope and the ground nail should be at a 90-degree angle, which is conducive to reaching the force. strength. Pay attention to the corresponding fixation in the fixing sequence, for example: the left front corner, the right rear corner, the right front corner, and the left rear corner in sequence. After the entire tarp is fixed, adjust the rope pull line to make all aspects of the pulling force common.

       The skirt of the tarp is tied with rope, which is more conducive to windproof. Linyi Tarpaulin Factory reminds everyone that when supporting the tarpaulin, in addition to the reliable connection with the tent pole, special attention should be paid to pulling the leash to make the tarp tight so that the tarpaulin can achieve good rain resistance.