Folding and packing of tarpaulin

Folding and packing of tarpaulin：

1. The front of the tarpaulin is flattened upward, leaving two side ropes, and the two sides of the length direction are folded towards the longitudinal midline of the tarpaulin.

2. Divide the folded sides into three equal parts, and fold them twice towards the midline.

3.Fold the two sides of the tarpaulin in the width direction in each direction in the horizontal midline of the tarpaulin, and then fold each in half three times in a row in the middle and then be firm.The dimensions after folding are about 1000mm×600mm×300mm.

4. Tie with reserved rope, tie crosses on both sides, tighten and tie tightly, and the rope head should be stuffed well. It should not be loose and the rope buckle should fall off, and it should not be dragged.

5.After folding, the small road emblem and tarpaulin number on the tarpaulin should be completely and clearly exposed.